Croaker machine GS150
The machine is used for processing semicircular edged material into boards of the required thickness. It is made of solid metal construction for stability and precision, with motors and pinch rollers mounted directly to the machine body through heavy-duty bearing units.
Advantages:
- The maximum thickness of the finished workpiece is 80 mm.
- Maximum cutting thickness – 150 mm.
- Frequency converter included
- The presence of a stripping saw, removes the “step across the entire width of the board”
- The presence of a separator between the saw blocks allows for intermediate waste removal; the working length in the basic configuration is 6.3 m.
-Aspiration outlets 150 mm
-Magnetic lock on the protective covers (will not allow you to open the saw unit during operation)
-Limit switches on the housings prevent the drives from starting when replacing saws.
- Angular gearbox for transmitting movement from the longitudinal chain to the drive shafts
- The maximum thickness of the finished workpiece is 80 mm.
- Maximum cutting thickness – 150 mm.
- Frequency converter included
- The presence of a stripping saw, removes the “step across the entire width of the board”
- The presence of a separator between the saw blocks allows for intermediate waste removal; the working length in the basic configuration is 6.3 m.
-Aspiration outlets 150 mm
-Magnetic lock on the protective covers (will not allow you to open the saw unit during operation)
-Limit switches on the housings prevent the drives from starting when replacing saws.
- Angular gearbox for transmitting movement from the longitudinal chain to the drive shafts
Basic equipment:
- saw unit for vertical saws - 1 piece
- saw block of horizontal saws - 1 piece
- drive table with separator 2.1 m – 3 pcs.